TYCO SPRINT RULES

As of September-2004
  1. Sprint body with cage & wing on top of cage. Wing must be 1"x1" with one side panel on each side of wing.
  2. Stock Tyco 440-x2 narrow chassis
    1. May change to any front axle.
    2. Rear axle must be stock.
    3. Any rear tires & rims allowed.
    4. Any front tires & rims allowed.
    5. Everything else must be stock!!! Must be in stock location & working order!!!
    6. No armature lower than 6.2 ohms on an ohm meter.
    7. You must have the white spacer in the center of the axle next to the gear.
    8. No spacers are allowed between the chassis and the tires.
  3. Wings must be securely fastened to cage. Front wing is optional.
  4. Any over the counter 20t-25t axle gear is legal. As long as they are available to everyone. As of September 1, 2004 the 18t and 19t gears are no longer legal.
  5. Mattel's newest bulkheads with the green wire armatures can not be used.
  6. Only factory plastic motor spacers allowed.
  7. No reversed zapped magnets allowed anywhere.
  8. Side body tabs may be sanded but no other sanding or cutting or grinding is allowed on the chassis.
  9. If there is anything you do not like, bring it up at the next driver's meeting.
  10. All other rules apply from Tyco Modifieds.

Please Note: We are here to enjoy the sport of H. O. racing. If you are cheating we don't need you. So if you don't want to look bad when you get caught don't cheat. We will not tolerate the cheating. If you must cheat to race go do it somewhere else. It only hurts the club, the members, and yourself! Think about it! Thank You. - Tom

Click here for the racing schedule.

Tom Hiester's HO Raceway
256 Old Lancaster Pike
Reading, PA 19607-2371
(610) 796-0490

E-mail Tom thmcho@comcast.net

SEE YOU AT THE TRACK!!!

Last Updated: 28 May 2008